Back

Installation - World-Link Digital Adapter (Cisco SPA112)

Quick Installation Guide

http://www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/spa100-200/quick_start/
SPA100_ATA_78-19933.pdf

Getting Your Digital Adapter Up and Running

Check your digital adapter package contents. It should contain the items shown here:



Equipments Needed
  1. World-Link Digital Adapter (Cisco SPA112)
  2. Cable or DSL Modem (or Home Network Modem with Built in Router)
  3. Router (You Don't need Router if you have Networking Modem)
Connect the World-Link Digital Adapter
  1. Power off your cable or DSL modem, and router.
  2. Connect the included Ethernet network cable to the INTERNET Port of the World-Link Digital Adapter and connect the other end to one of your router's Ethernet ports.
  3. Connected the included power adapter to the POWER port of the World-Link Digital Adapter. Connect the other end to an electrical outlet.
  4. Using a telephone cable, connect your telephone to the PHONE 1 port of the World-Link Digital Adapter.
  5. If you have one, power on your cable or DSL modem first. Wait for 1 to 2 minutes.
  6. Power on the router. Wait for 1 to 2 minutes.
  7. Power on the World-Link Digital Adapter, wait for about 30 second. The 3 green lights (Power, Ethernet, and Phone LEDs) will be solidly lit when your World-Link Digital Adapter is ready for use. You will hear a dial tone when picking up your phone set.

The installation of the World-Link Digital Adapter is complete. You may pick up the phone and make calls.

DO NOT RESET THE WORLD-LINK DIGITAL ADAPTER.

Instruction for making outbound/inbound calls
  1. For calls within the US & Canada: Dial 1 + Area Code + Phone Number (i.e. 1-212-513-0000)
  2. For any international calls: Dial 011 + Country Code + Phone Number (i.e. 011-86-21-0000-0000)
  3. For calling in your area just Dial Area Code + Phone Number (i.e. 416-888-8888)
  4. To receive calls you can use your phone as usual, answer your phone when it rings.